What are the important tips for buying zippers?

What are the important tips for buying zippers?

When purchasing zippers, it is best for the purchaser to inform the zipper manufacturer what type of product the zipper is used on, whether there are any special post-processing requirements for the product, whether it needs ordinary water washing or acid enzyme washing, etc. This will facilitate the zipper manufacturer to make appropriate adjustments to the quality and personalized requirements of the zipper based on the requirements for supporting products.

01

2022

/

06

Three ways to sew a zipper

Three ways to sew a zipper

Before installing the zipper, it is best to iron some adhesive interlining on the zipper installation area, especially when sewing lightweight or unstable fabrics. Using a thinner adhesive interlining about 1 inch wide and the same length as the zipper mouth will greatly help the effect and appearance of sewing the zipper.

01

2022

/

06

Zipper Troubleshooting

Zipper Troubleshooting

1. If the chain is not opened and closed smoothly, if you pull the chain head hard, the teeth will be bitten. At this time, apply paraffin or lubricating spray [FASTENERMATE] on the surface and inside of the teeth, and then move the slider several times to make it slide loose.

01

2022

/

06

Zipper clothing washing precautions

Zipper clothing washing precautions

When using a washing machine or dryer, make sure the zipper is fully closed. If the zipper is not fully closed, it may get tangled with other clothes and damage the chain teeth or slider, or the fabric of other clothes. Long or thin sliders may get caught in the holes of the drum and break, so it is recommended to use a laundry bag when washing clothes with zippers. After drying, wait until the temperature of the clothes has returned to normal temperature before opening or closing the zipper.

01

2022

/

06

How to distinguish the quality of metal zippers, resin zippers and nylon zippers?

How to distinguish the quality of metal zippers, resin zippers and nylon zippers?

The test method for the straightness of a zipper is: take a finished zipper, place it flat on a flat plate, and keep it in a natural state. Then use your fingers to move back and forth along the edges of the chain teeth once, and use a ruler to gradually move closer to the bend. Then use another ruler to measure the distance between the chain tooth foot and the ruler. This distance is the straightness.

01

2022

/

06

What is a button? When was it invented?

What is a button? When was it invented?

Buttons are a daily clothing item that humans often keep. Buttons refer to small spherical or sheet-like objects that are inserted into button loops to fasten clothes. In my country, the origin of buttons can be traced back to 1,800 years ago. The earliest buttons were mainly stone buttons, wooden buttons, and shell buttons. Later, they developed into buttons made of cloth and knotted buttons.

26

2022

/

03

< 1...5678 >